Feeling stressed about dealing with dirty wooden items? Do not know which is a suitable way to clean unfinished wood furniture? Keep reading to find your answer.
“How to clean unfinished wood furniture?” is difficult as bare wood furniture is easy to get damaged.
Before cleaning an unfinished wood surface for conservation purposes, it is important to evaluate the surface to determine whether or not cleaning is appropriate.
These issues may be the biggest reasons that make you feel stressed when cleaning an unfinished wood furniture surface because it needs cleaning more frequently and carefully than a normal finished one.
However, don’t worry because this article will ease your stress.
How to Clean Unfinished Wood Furniture
Cleaning dust and debris
Use a soft brush or a microfiber cloth
As bare wood readily absorbs water, a wet cleaning method is unsuitable. Instead, you should use a soft brush or a microfiber cloth to wipe all the small dust.
Rather than dragging it across the surface, you had better brush the dust from the surface with a gentle flicking motion to avoid scratching it.
A vacuum cleaner covered with a fine mesh filter is convenient for vacuuming all this dust-up. With a similar technique, if there is no soft brush available in your house, use a microfiber cloth.
Remember that using a microfiber cloth or a brush is not a good way to care for deeply ingrained wood furniture.
Perform routine cleaning
Dust and debris appear frequently. You may want to avoid aggressive cleaning for your wood appliances as it exaggerates the grain pattern by wearing away the surface.
Besides, too much dust and debris can cause severe damage because you have to use special treatments to clean it up.
In this case, performing regular cleaning maintenance is a must. Try to keep your unfinished wood furniture clean once a week or once a month to improve its life span through the years.
Removing grime and stains
Clean with a vacuum and a stiff brush
A stiff brush and a vacuum proved to be efficient in removing ingrained surfaces. However, this combination only works as a specific overcleaning treatment for heavy dirt when the wood furniture is in good condition.
A tip for you to increase the brush’s effectiveness is you can trim its bristles shorter before using it to clean the wooden surfaces.
Once the bristles are shorter, they become more flexible and give less abrasive destruction to the surface.
After the treatment with a brush, you can use a vacuum to capture dislodged dirt.
Employ erasing compounds
This method requires using gentle, circular cleaning motions to achieve the best result. Rubbing too hard can damage the surface severely.
One of the advantages of using this way to clean the unfinished wood furniture is that a small amount of erasing compound can do wonders on a large surface area.
You should change to another erasing compound if it turns grey with dirt.
Additional Tips and Advice
Since unfinished wood furniture needs a specific cleaning routine, there are some notes to deal with the problems that may happen when you own one in your house.
When cleaning, you should avoid wet cleaning methods and ensure that every motion should be as gentle as possible to prevent further damage.
There is no doubt that every technique has its pros and cons, so do not stick to any cleaning methods and carry out some tests in a small area first.
In Sum
If you still wonder how to clean unfinished wood furniture, the answer always depends on choosing an appropriate cleanup method.
Potentially, all cleaning techniques have certain damage to bare wood surfaces. It is important to practice preventive conservation measures to limit the need for cleaning.
Having established if cleaning is appropriate, it is important to determine how much cleaning is necessary.
